UK Freight only 8.75
Spring-Mounted Pipe Clamp Thermometer / Temperature Gauge
  • Click to enlarge

Spring-Mounted Pipe Clamp Thermometer / Temperature Gauge

A durable, reliable, and reasonably accurate mechanical pipe-clamp thermometer complete with fixing spring

Due to the sensing face being flat, temperature can be lost between the pipe and the sensor face, if you experience this problem we therefore recommend that you try the following - scrunch up a piece of baking foil into a tight ball about 20mm diameter, then using a flat faced object such as a wooden baton, squash this onto the side of a pipe, what you end up with is a curve which fits the pipe perfectly and a flat spot which will sit nicely up against the sensor face on the dial, aluminium is a fairly good conductor and so the temperature lost between the faces should be less significant, you could also wrap some pipe insulation around the assembly to keep the draft off it it

Nominal Size63 mm
RangeVarious, See Options Below
Scales°C Outer (Black), °F Inner (Red)
Case304 Stainless Steel
WindowInstrument Glass
Dial LegendStoved Enamel on Aluminium
MovementPrecision Bi-Metal Spiral
AccuracyEC Class 2 (UNI EN 13190:2003); Typical ±1.6%, Specified ±2.5%
Ingress ProtectionIP 40 as per EN 60529
Min Pipe Diameter3/8"
Max Pipe Diameter1.25"

Product Options


Product CodeBI001

This field is required.
This item has been added to your cart...