Watts Televar TLM, Hydrostatic Contents Gauges
The Televar TLM gauge is extremely popular for commercial and domestic sites where reliability and accuracy is essential
- Featuring a hand-pump mechanism the gauges do not require any power, and are therefore ideally suited to hazardous environments
- Constructed from High-Impact Plastic but without Ingress-Protection, these gauges should always be fitted inside a weather-proof housing
- With versions available for vertical, or horizontal tanks, each displays the tanks contents as a percentage of the total capacity, and is suitable for tanks from 0.9 m up to 3.0 m in height
- Supplied with 50m of black Polyethylene Connection Tube, and a GRP weighted Nylon Balance Chamber with 3m of NBR suspension tube
- Suitable only for tanks that are permanently atmospherically vented
- For all low-viscosity Fuel and Oil products which are compatible with GRP, NBR and Nylon. Bespoke Balance Chambers for agressive liquids can also be produced to your requirements.
Manufacturer Part Number: TLM3R:01.104-04.130-05.150
Specification| Min Tank Depth | 0.9 metres |
| Max Tank Depth | 3.0 Metres |
| Accuracy | ±2.0% |
| Scale | Percentage of capacity |
| Size | 160 mm x 170 mm |
| Tank Fitting Adaptor | 1" BSP Male Threaded |
| Max Temperature | Unknown |
| Max Viscosity (Redwood No.1 @ 16 Celcius) | Unknown |
| Tube Length Supplied | 50 Metres |
