UK Freight only 8.75
Delta Cast Iron Gear Oil Pumps, Max 120c, 400v 50Hz 3Ph
  • Click to enlarge

Delta Cast Iron Gear Oil Pumps, Max 120c, 400v 50Hz 3Ph

A general purpose cast iron gear pump with viton seals. With its viton seals and shaft coupling it is suitable for pumping oils at up to 120 Celcius.

  • Made in India
  • CE approved
Wetted Components
Pump Body Cast Iron
Impellor Case Cast Iron
Impellor Case Seal Viton
Motor Shaft Seal Viton
Vanes Not Present
Vane Springs Not Present
Rotor / Gear / Impellor Hardened Steel
Shaft Key / Nut Hardened Steel
Motor Shaft Hardened Steel
Bypass Valve Piston Not Present
Bypass Valve Seal Not Present
Bypass Valve Spring Not Present
Performance
Voltage / Frequency 400v 50Hz 3-Phase
kW Various
Amps Various
RPM Various
Duty Cycle Continuous
Cable Length Not Present
Bypass Valve Y/N N
Max Flow Various, Max 110 lpm
Discharge Pressure Various, Max 10 Bar
Max Suction Lift (Dry) 0.5m
Max Suction Lift (Wet) 3.0m
Inlet Fitting Various
Outlet Fitting Various
Max Particle Tolerance 100 Micron
Max Liquid Temp +120° Celcius
Min Liquid Temp TBC
Max Room Temp +40° Celcius
Min Room Temp TBC
Thermal Protection Y/N Y
Max Liquid Viscosity 75 cSt
Ingress Protection Unknown
Options Available
Three Phase 415v kW (400v) lpm Head (m)
Delta 20 0.75 20 100
Delta 30 1.0 30 100
Delta 50 1.5 50 100
Delta 75 2.0 75 100
Delta 100 3.0 110 100

Product Options

£328.00


Product Code OIL4LGSE20
Condition New

This field is required.
Top
This item has been added to your cart...