Shop by Category

Richter Dipping Tape, Brass Frame, Stainless Steel Tape, IPM Approved

Product Information

Richter Dipping Tape, Stainless Steel

Supplied as standard with Wooden Handle, Brass Frame, and Stainless Steel Tape, with raised markings in mm

Brass Weight is to be purchased seperately

Calibration Certificate if required, is to be purchased seperately. 1 Certificate is required per 1 Tape.

  • Richter Dipping Tapes conform to the specifications contained in the Institute of Petroleum Measurement Manual Part II, and to the international standard ISO/FDIS 4512
  • Each tape and weight is marked with its appropriate IPM number
  • These standards cover every component in precise detail, including the brass dip weight, the bell type locking swivel hook, and the brass frame winder and wooden handle. They reflect the accumulated experience of users in the petrochemical industry over many years and have been adopted by the industry in most parts of the world.
  • The maximum permitted error for the tape/weight combination is 1.5mm for all lengths up to 30m
  • The tapes are graduated on one side only. Graduations are either in mm (IPM8), or feet, inches and 10ths of inche (IPM7a)
  • Available to special order only, are graduations in feet, inches, and 1/16ths inches (IPM7b)
  • Most users specify these tapes in black etched carbon steel, however we offer the alternative of etched stainless steel (grade 4021) for those applications which call for this tape material
  • Refills are available for when the tapes wear out

Richter also offer a low cost measuring tape, if IPM approval is not required, it can be found HERE

Reels (Inc. Tape)
Type Part Number Length
Metric FR-D-IPM8-464-10 10 m
Metric FR-D-IPM8-464-15 15 m
Metric FR-D-IPM8-464-20 20 m
Metric FR-D-IPM8-464-25 25 m
Metric FR-D-IPM8-464-30 30 m
Tapes (Refills)
Type Part Number Length
Metric FR-D-IPM8-464A-10 10 m
Metric FR-D-IPM8-464A-15 15 m
Metric FR-D-IPM8-464A-20 20 m
Metric FR-D-IPM8-464A-25 25 m
Metric FR-D-IPM8-464A-30 30 m
Frames (Empty)
Type Part Number Length
Universal FR-EMPTY-F.W-30 For tapes up to 30 m
Weights (BRASS)
Weight Part Number Graduations
675 g FR-WEIGHT-B-M mm
1600 g FR-WEIGHT-B-2M mm
1.5 lbs FR-WEIGHT-B-1Z Inches, 10ths
3.5 lbs FR-WEIGHT-WZ Inches, 10ths

Shown Below, 675G Brass Weight

Commodity Codes
Sampling Vessels 9032890090
Winders 8425390090
Dip Tapes 9017801000
Gauging Pastes 9026107000

Download Richter Dipping Tapes - General Brochure PDFDownload Richter Dipping Tapes - General Brochure PDF

Download Richter Dipping Tapes - Correct Selection of Dip Weights PDFDownload Richter Dipping Tapes - Correct Selection of Dip Weights PDF

Product Options:

Cal. Cert. (1 Per Tape) (£68.00)
FR-D-IPM8-464-10 (£107.10)
FR-D-IPM8-464-15 (£124.70)
FR-D-IPM8-464-20 (£158.70)
FR-D-IPM8-464-25 (£181.30)
FR-D-IPM8-464-30 (£200.00)
FR-D-IPM8-464A-10 (£62.40)
FR-D-IPM8-464A-15 (£79.40)
FR-D-IPM8-464A-20 (£102.00)
FR-D-IPM8-464A-25 (£113.30)
FR-D-IPM8-464A-30 (£129.20)
FR-EMPTY-F.W-30 (£45.40)
FR-WEIGHT-B-1Z (£45.90)
FR-WEIGHT-B-2M (£88.40)
FR-WEIGHT-B-M (£45.90)
FR-WEIGHT-WZ (£88.40)

Product Code: RICRTY9C266

Quantity:

Customers who bought this also bought…

Mobile Site