Piusi ST with Meter & Filter, Wall-Mounted Fuel Dispensing System
ST with Meter is a modular diesel transfer station. Suitable for non-commercial use, it can include components that best reflect the working condition of the user.
A special feature of the ST with Meter diesel dispenser is its simple installation. Its versatility makes it a transfer station adaptable to any condition. Indeed, it finds its application where it is necessary to complete mobile or buried tanks with the dispensing unit. The diesel transfer station is indicated for different sectors including agriculture and automotive for the refuelling of agricultural machinery, tractors, vehicles and machinery in general.
The diesel transfer system is equipped with a bottom valve with filter and nozzle support. The The 4 mt length (6 mt on request) of the dispensing hose allows the system to be used in a practical and convenient manner. The metal box, on request, protects the components of the diesel transfer station from harsh weather conditions and other possible causes of damage. Always on request, the PIUSI Water captor water separator filter ensures the quality of the fluid dispensed, so that no impurity can enter.
The mechanical flow meter allows, with a simple view, to keep the fuel consumption monitored while dispensing and the reduced noise level (less than 75 dB) makes ST with Meter and Filter a safe fluid transfer system. ST with Meter and Filter can always be integrated with the accessories needed to complete the installation. These include the electronic flow meter K600, the automatic nozzle, the pump AC 56-72 l/min, or the pump AC E120.
ST with Meter and Filter is the diesel transfer station tailored to your needs.
The ST group can be locked inside a metal housing known as the "ST Box" to protect the components. The ST Box can be found HERE
Wetted Components| Pump Body | Cast Iron |
| Impeller Case | Cast Iron |
| Impeller Case Seal | Viton |
| Motor Shaft Seal | Viton |
| Vanes | Acetyl |
| Vane Springs | Spring Steel |
| Rotor / Gear / Impellor | Cast Iron |
| Shaft Key / Nut | Cast Iron |
| Motor Shaft | Cast Iron |
| Bypass Valve Piston | Acetyl |
| Bypass Valve Seal | Viton |
| Bypass Valve Spring | Spring Steel |
Performance| Voltage / Frequency | 230vAC50Hz |
| kW | Various |
| Amps | |
| RPM | 2900 |
| Duty Cycle | 20 Minutes |
| Cable Length | None |
| Bypass Valve Y/N | Y |
| Max Flow | 72 lpm |
| Discharge Pressure | 1.6 Bar |
| Max Suction Lift (Dry) | 3.0 m |
| Max Suction Lift (Wet) | 3.0 m |
| Inlet Fitting | 1" BSP |
| Outlet Fitting | 1" BSP |
| Max Particle Tolerance | 100 Micron |
| Max Liquid Temp | 57°c |
| Min Liquid Temp | |
| Max Room Temp | 40°c |
| Min Room Temp | |
| Thermal Protection Y/N | Y |
| Max Liquid Viscosity | Diesel |
| Ingress Protection | IP55 |
Download Piusi ST Meter & Filter Transfer Pumps, Datasheet PDF
